 |
International Journal of Scientific Research and Engineering Development( International Peer Reviewed Open Access Journal ) ISSN [ Online ] : 2581 - 7175 |
IJSRED » Archives » Volume2 -Issue5
IJSRED Volume 2 - Issue 5, September - October 2019
Cover-Page 1 Cover-Page 2
| S. No. | Title and Authors Name | Paper ID |
|---|---|---|
| 21 |
Synthesis and Characterization of Superhydrophobic Coatings
Author(s): Waleed Maqsood,
Page(s): 303-307
 ]
Abstract
Superhydrophobic coatings have drawn much attention in recent years because of their unique potential industrial applications. The prepared coating is cheap and versatile and can be applied on various substrates including glass, paper, acrylic, transparency and wood. Furthermore, the SHCs exhibit good long-term stability, water-durability and UV-durability, adapting to out-door environment. Above all, the coatings are environmental, low cost and can be quickly coated on various large-scale substrates, which will widen their practical applications. Two distinct theoretical models have been used to guide the generation of superhydrophobic surface by either roughening the surface or lowering the surface free energy, or both.The increasing interest in studying and manufacturing hydrophobic surface results from their possible practical applications. They find their primary use in corrosion, erosion or general degradation protection applications on metallic, polymer and inorganic oxide (stone, glass, ceramic, etc.) solid surfaces. In recent years, this field has evolved into a major industry trade which covers modern applications from anti-fogging as well as water and snow repellent surfaces for construction materials, glass, automotive and aerospace technology, all the way to reduce frictional drag on airplane wings and ship hulls. Keyword: Superhydrophobic coating; Long-term stability.× 
Waleed Maqsood, "Synthesis and Characterization of Superhydrophobic Coatings" Vol 2-Issue 5 (303-307) September - October 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com. × |
IJSRED-V2I5P21 |
| 22 |
Using SWOT and AHP to Evaluate the key Factors on Management of Indonesian Restaurant
Author(s): Ghina Anggraeni, Siti Azizah
Page(s): 308-314
]
Abstract
The restaurant business is a business that is much demanded by investors. The development of the restaurant business in Kaohsiung is one of the responses to high food demand caused by the increasing Indonesian population. The research purpose was to investigate the key factors that have high priority and play roles in influencing results in the hierarchical system on management of Indonesian restaurant. A total of 25 respondents were interviewed in this study. Research methods used in this study were qualitative and quantitative. Data analysing were SWOT (IFE and EFE matrix) then continued with AHP method to find out the priorities of the various elements in each hierarchy. The results of the analysis obtained a value of 0.020, with the proportion of CR inconsistencies less than 0.10, with the proportion of CR inconsistencies less than 0.10, which meant that we can accept this assessment had been fulfilled thus we could continue the decision-making process using AHP. The result of the SWOT analysis showed that Indonesian restaurant on Kaohsiung have good weight in the internal environment with position good strength and weight in the external IE Opportunity. The situation of Indonesian restaurants in Taiwan especially in Kaohsiung there are many Indonesian restaurants. Determining key factors in Indonesian restaurant management are from internal factors which are the strength factors of Indonesian restaurant financial planning, control, and strategies to differentiate products. While the weaknesses of Indonesian restaurants are increasing employees, education and training. External factors are opportunities. Opportunity factors are lifestyle, value-added eating experiences. Keyword: AHP, Indonesian Restaurant, Management, SWOT.×
Ghina Anggraeni, Siti Azizah "Using SWOT and AHP to Evaluate the key Factors on Management of Indonesian Restaurant" Vol 2-Issue 5 (308-314) September - October 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com. × |
IJSRED-V2I5P22 |
| 23 |
Mobile Web Design & Development Approach for Feature Phones and Smart Phones
Author(s): Anoop Kumar Gupta
Page(s): 315-322
]
Abstract
The restaurant business is a business that is much demanded by investors. The development of the restaurant business in Kaohsiung is one of the responses to high food demand caused by the increasing Indonesian population. The research purpose was to investigate the key factors that have high priority and play roles in influencing results in the hierarchical system on management of Indonesian restaurant. A total of 25 respondents were interviewed in this study. Research methods used in this study were qualitative and quantitative. Data analysing were SWOT (IFE and EFE matrix) then continued with AHP method to find out the priorities of the various elements in each hierarchy. The results of the analysis obtained a value of 0.020, with the proportion of CR inconsistencies less than 0.10, with the proportion of CR inconsistencies less than 0.10, which meant that we can accept this assessment had been fulfilled thus we could continue the decision-making process using AHP. The result of the SWOT analysis showed that Indonesian restaurant on Kaohsiung have good weight in the internal environment with position good strength and weight in the external IE Opportunity. The situation of Indonesian restaurants in Taiwan especially in Kaohsiung there are many Indonesian restaurants. Determining key factors in Indonesian restaurant management are from internal factors which are the strength factors of Indonesian restaurant financial planning, control, and strategies to differentiate products. While the weaknesses of Indonesian restaurants are increasing employees, education and training. External factors are opportunities. Opportunity factors are lifestyle, value-added eating experiences. Keyword: Responsive Design, Mobile Design.×
Anoop Kumar Gupta "Mobile Web Design & Development Approach for Feature Phones and Smart Phones" Vol 2-Issue 5 (315-322) September - October 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com. × |
IJSRED-V2I5P23 |
| 24 |
A Review Paper on Consumers Buying Behavior in Relation to Green Products
Author(s): Md. Arizsiddique, Bhumika Dewangan
Page(s): 323-326
]
Abstract
Biological issue is a sizzling subject nowadays as essentially every country's organization and society has started to be progressively careful about these issues. This prompts an example of green advancing used by the firm as one of the methodology to get advantage and secure nature. This paper will look at the green displaying and its sensibility similarly as the gadgets and publicizing mix of green advancing. Other than that, the green purchaser and checking will be discussed in further in this paper as this will pull in more buyers. At last, firm will be benefitted once green promoting technique is associated. Keyword: Publicizing, green displaying, supportability, green publicizing benefits, green displaying Gadgets, affiliation benefits, green customer.×
Md. Arizsiddique, Bhumika Dewangan "A Review Paper on Consumers Buying Behavior in Relation to Green Products" Vol 2-Issue 5 (323-326) September - October 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com. × |
IJSRED-V2I5P24 |
| 25 |
The Correlation Between Alaska’s Increasing Annual Atmospheric Temperature and Decreasing Permafrost Depth
Author(s): Anna Keibler
Page(s): 327-341
]
Abstract
Over the past 70 years, the state of Alaska has exhibited an increase in average annual temperature and a decrease in overall permafrost depth. Permafrost degradation can result in the release of carbon dioxide and methane into the atmosphere and threatens the structural integrity of the tundra. Previous studies have focused on the permafrost’s active layer thickness as well as changes in permafrost depth of specific sites throughout Alaska. However, there is a significant lack of research that focuses on permafrost depth spanning the entire surface area of the region. The purpose of this research is to determine if a direct correlation exists between increasing average annual temperature and decreasing permafrost depth throughout Alaska. Data in this research was compiled from two year groups, 1950 – 1975 and 2000 – 2019, utilizing data allocated from previously compiled datasets and historical archives such as the National Snow and Ice Data Center, National Oceanic and Atmospheric Administration, and the CALM Network. Data analyzed via Inverse Distance Weighted and Simple Kriging methods of interpolation produced a series of maps showing a dramatic decrease in permafrost depth between the two year groups, with permafrost receding from 50% coverage to less than 25% coverage. These maps also show an increase in average annual temperature that is inversely proportional to latitude. Overall, the data indicates that there is no direct correlation between average annual temperatures and permafrost depth for permafrost layers penetrating less than 300 meters, while very deep permafrost – penetrating over 300 meters – must maintain an average annual temperature below 21.11°F. Keyword: Alaska, permafrost, permafrost degradation,permafrost depth, AAT.×
Anna Keibler "The Correlation Between Alaska’s Increasing Annual Atmospheric Temperature and Decreasing Permafrost Depth" Vol 2-Issue 5 (327-341) September - October 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com. × |
IJSRED-V2I5P25 |
| 26 |
RP-97: Formulation of Special Class of Standard Bi-Quadratic Congruence of Composite Modulus
Author(s): Prof. B M. Roy
Page(s): 342-347
]
Abstract
In this paper, the author considereda special type of standard bi-quadratic congruence of composite modulus for formulation of its solutions. The author’s efforts has provided a formulation of solutions of the said congruence. The discovered formula is tested true by solving different examples and by its verifications. Such formulation was not considered by earlier mathematicians and no effective method is found to find its solutions. Formulation is the merit of the paper. It is proved time-saving, easy and simple. Sometimes the solutions can be obtained orally. This is one more merit of the paper.This made the study of bi-quadratic congruence more interesting. Keyword: Binomial expansion, Bi-quadratic Congruence, Composite Modulus, Formulation.×
Prof. B M. Roy "RP-97: Formulation of Special Class of Standard Bi-Quadratic Congruence of Composite Modulus" Vol 2-Issue 5 (342-347) September - October 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com. × |
IJSRED-V2I5P26 |
| 27 |
Analysis of 20 Years Rainfall Data from 1999 to 2018 in Badulla District: A Case Study
Author(s): N.R.A.M.Ruwangika, C.N.Hettiarachchi, G.M.L.P.Aponsu
Page(s): 348-354
]
Abstract
The Climate in Sri Lanka is tropical and consists of very characteristic in dry and wet seasons. As compared with the land area of Sri Lanka, Badulla district covers 4.4 %. Badulla district is a capital city of Uva province and it consists of 15 AGA divisions and 1960 villages. Badulla district is an agricultural district where vegetables, tea, fruits, and paddy are cultivated. The district has been separated into two portions as Upper region and Lower region considering the climatic and geographical features. The upper region of the district is eminent for tea plantation and vegetable cultivation while the lower region is famous for paddy agriculture. Changing climate is an uncountable cause of worry for all over the world especially rain-fed developing country. The fluctuated rainfall pattern harmfully affects their crops. The attempt was made to study the variation of monthly, seasonal and annual rainfall over Badulla district of Sri Lanka during twenty years’ period from 1999 to 2018. Annual rainfall trends over the Badulla District showed the increasing trends of about 15.8 mm/Year. Near about 12 years (60 %) shows annual rainfall less than that of mean annual rainfall and 08 years (40 %) show annual rainfall more that of mean annual rainfall. First Inter-Monsoon Season (March-April), Southwest-monsoon Season (May-September) and Second Inter-Monsoon Season (October-November) rainfall trends show the decreasing rainfall trends while Northeast-Monsoon Season (December-February) rainfall trends shows the increasing rainfall trend. Keyword: Rainfall, Annual, Seasonal, Monthly, Rainfall trends.×
N.R.A.M.Ruwangika, C.N.Hettiarachchi, G.M.L.P.Aponsu "Analysis of 20 Years Rainfall Data from 1999 to 2018 in Badulla District: A Case Study" Vol 2-Issue 5 (348-354) September - October 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com. × |
IJSRED-V2I5P27 |
| 28 |
Development of Fuzzy Logic Models for the Predection of Weld Bead Geometry in Pulsed Gas Metal ARC Welding
Author(s): Donka Demudu, Penta Shreeni Vasarao
Page(s): 355-364
]
Abstract
The quality of weld joint is influenced by process parameters during the welding process. In order to achieve high quality welds, input process parameters should be controlled. In this investigation four input process parameters such as arc rotational speed, ratio of wire feed rate to travel speed, wire feed rate and eccentricity are considered.The experiments were conducted on square butt joint plate of 5083 H111 aluminium alloy using full factorial design of experiments. Output parameters like bead penetration, bead height, bead width are measured. The fuzzy models for bead penetration, bead height and bead width are developed using fuzzy logic. This fuzzy model has been used for prediction of output parameters. Accuracy analysis of weld bead geometry is also performed.It is observed that % of error is less than 10% in most of the cases for bead height and width and less than 20% for bead penetration. Keyword: Welding, 5083 H111 aluminium alloy, fuzzy logic.×
Donka Demudu, Penta Shreeni Vasarao "Development of Fuzzy Logic Models for the Predection of Weld Bead Geometry in Pulsed Gas Metal ARC Welding" Vol 2-Issue 5 (355-364) September - October 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com. × |
IJSRED-V2I5P28 |
| 29 |
Perception of Traffic Light with Image Processing and Machine Learning
Author(s): Ganesh Chavan, Reshma Bankar, Yogini Deshmukh, Nilam Nazirkar, Rajani Kadam
Page(s): 365-369
]
Abstract
In perception of traffic light detect various lights from an image and then recognize traffic light and then estimate the status of the light signal. Automatic detection and recognition of traffic light is an important perception function for advanced driver assistance system (ADAS) or an autonomous vehicle. Three key challenges of the system are computation time, varying illumination conditions and false positives. In our approach, perception of traffic light is done from the dark frames and accurately classified using machine learning in consecutive bright frames. A multiclass classifier is adopted to reduce number of false positives in the bright channel. In order to overcome challenging problems in the traffic light recognition, we have proposed a traffic light perception system based on an image processing and machine learning. Keyword: Traffic signal, traffic light recognition, image processing, machine learning, advanced driver assistance system, multiclass classifier.×
Ganesh Chavan, Reshma Bankar, Yogini Deshmukh, Nilam Nazirkar, Rajani Kadam "Perception of Traffic Light with Image Processing and Machine Learning" Vol 2-Issue 5 (365-369) September - October 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com. × |
IJSRED-V2I5P29 |
| 30 |
User Navigation Tracking and Analysis on Single Page Application
Author(s): Nale Rajesh Keshav,Agam Minal Hanumant, Bhunje Divyanka Vaibhav,Kalbhor Kshitija Kakaso,Shinde Shreyas Surendranath
Page(s): 370-372
]
Abstract
This paper explores ,the analysis of users data based upon navigation clicks made by user on the application interface is usedto analyze user behavior on Single Page Application. The approach behind developing navigation tracking it can be useful for particular organization in order to monitor employee activities based upon navigation clicks of the Single Page Application ERP Platform. The performance of employee in the organization on the particular platform such as an ERP platform can get analyzed through the clickstream activities made by employee on the working module ofapplication. Navigation tracking can be helpful for making future prediction based on captured data. So it can be helpful further decision making of the organization. The prediction and analysis of user clickstream activities can be not only for particular organization or specific application on the platform but also for helpful in general purpose application and other ERP based platforms. The approach behind the development of the proposed system includes some business analytics techniques such as data mining. The tracked activities can be shown to the administrator in the form of the graphs such as the bar graph, pie chart ,histogram in the month wise day wise and hour wise manner. And the prediction can be done by using the tracked data that the user or the employee is doing wrong activities or the fraud activities. Keyword: ERP Platform, Single page application, clickstream, data mining.×
Nale Rajesh Keshav,Agam Minal Hanumant, Bhunje Divyanka Vaibhav,Kalbhor Kshitija Kakaso,Shinde Shreyas Surendranath "User Navigation Tracking and Analysis on Single Page Application" Vol 2-Issue 5 (370-372) September - October 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com. × |
IJSRED-V2I5P30 |
| Submit Manuscript | Processing Charges | Current Issue | Past Issue | How To Publish Paper |
| Open Access Policy | Cancellation and Refund | Terms and Conditions | Publication Rights | Plagiarism Policy |
