International Journal of Scientific Research and Engineering Development

International Journal of Scientific Research and Engineering Development


( International Peer Reviewed Open Access Journal ) ISSN [ Online ] : 2581 - 7175

IJSRED » Archives » Volume2 -Issue3


Submit Your Manuscript OnlineIJSRED

IJSRED Volume 2 - Issue 3, May - June 2019


Cover-Page
S. No. Title and Authors Name Paper ID
1
Virtual Screening of Phytocompounds from Andrographis Paniculata as Antivenom for Bungarus caeruleus
Author(s): V. Kavitha, Dr.N.Gunavathy
Page(s): 01-03
Abstract

Every year innumerable mortalities were reported in India due to snake bites. Traditional medicinal plants from local region of India were applied as an antidote for snake bites by tribes. Medicinal plants can be used as alternative treatment for antiserum therapy. Venoms constitute a rich source of phospholipase A2 (1DPY) enzymes, which show remarkable diversity in their structure and function. The antivenom activity of Andrographis paniculata which were computationally evaluated against PLA2 of Bungarus caeruleus (common krait). In this investigation, an In-silico drug designing studies for antivenom potentials against PLA2 was carried out by computational screening of Andrographis paniculata compounds with PLA2 molecule using Autodock 4.0 program.

Keyword: Antivenom, Phospholipase A2, Andrographis paniculata, Bungarus caeruleus, Computational Screening, Autodock 4.0.

×
IJSRED

V. Kavitha, Dr.N.Gunavathy "Virtual Screening of Phytocompounds from Andrographis Paniculata as Antivenom for Bungarus caeruleus" Vol 2-Issue 3 (1-3) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P1
2
Smart Antenna System for Static Scenario using PM and LMS Algorithm
Author(s): D.D.Khumane, S.M.Jagade, V.M.Mhalgi
Page(s): 04-07
Abstract

This paper presents simulation results for a smart antenna system based on direction of arrival estimation and null steering. Direction of arrival (DOA) estimation is based on the PM algorithm for identifying the directions of the desired signals and the null steering beamformer adapts the antenna pattern to steer the main beam towards the desired user and nullify all other interference. This system can be used to reduce multipath and co-channel interference. These benefits include the enhancement of coverage and the channel capacity, lower transmitted power, better signal quality, higher data rate and providing value-added services such as user’s position location (PL) and at the same time to minimize interference arising from other user by introducing nulls in their direction. Also this paper deals with adaptive beam forming approach for the dynamic case based on smart antennas and adaptive algorithms used to compute the complex weights like Least Mean Square (LMS) algorithm.

Keyword: Smart Antenna Technology, Beamforming, Direction-of-Arrival (DOA) Estimation, Multiple Signal classification (MUSIC), PM (Propagator Method), Least Mean Square (LMS), Signal Nulling.

×
IJSRED

D.D.Khumane, S.M.Jagade, V.M.Mhalgi "Smart Antenna System for Static Scenario using PM and LMS Algorithm" Vol 2-Issue 3 (04-07) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P2
3
Performance Evaluation of Smart Antenna: DOA Estimation using MUSIC and Beamforming using LMS
Author(s): D.D.Khumane, S.M.Jagade
Page(s): 08-13
Abstract

This paper presents a simulation study of a smart antenna (SA) system based on direction-of-arrival (DOA) estimation is based on the MUltiple SIgnal Classification (MUSIC) algorithm for finding the Position Location (PL) of the desired user. The beamformer steer the main beam towards the desired user and nullify all other interferer, through adaptive beamforming using Least Mean Square (LMS) algorithm. This simulation results revealed the sharper peaks in the MUSIC angular spectrum and deep nulls in the LMS beam pattern. Also, this paper deals with DOA estimation and adaptive beamforming for the dynamic case based on SA. Eigen decomposing fined the PL of the desired user using MUSIC algorithm and steer the beam toward this user using compute the weight vectors like Least Mean Square (LMS) algorithm. Also this paper illustrates the results for the LMS error on the basis of number of iteration / sample.

Keyword: Smart Antenna (SA), Beamformer, Direction-of-Arrival (DOA) Estimation, Multiple Single Classification (MUSIC), Least Mean Square (LMS), Signal Nulling.

×
IJSRED

D.D.Khumane, S.M.Jagade, "Performance Evaluation of Smart Antenna: DOA Estimation using MUSIC and Beamforming using LMS" Vol 2-Issue 3 (08-13) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P3
4
Fingerprint Based Online Voting System
Author(s): Sameer R. Adhikari, Pallav S. Bari, Babasaheb A. Abhale
Page(s): 14-18
Abstract

Fingerprint Based Online Voting System is a application where the user is recognized by his finger pattern. Since the finger pattern of each human being is different, the voter can be easily authenticated. The system allow the voter to vote through his fingerprint. Finger print is used to uniquely identify the user. The finger print minutiae features are different for each human being. Finger print is used as a authentication of the voters. Voter can vote the candidate only once, the system will not allow the candidate to vote for the second time. The system will allow admin to add the candidate name and candidate photo who are nominated for the election. Admin only has the right to add candidate name and photo who are nominated. Admin will register the voters name by verifying voter. Admin will authenticate the user by verifying the user’s identity proof and then admin will register the voter. The number of candidate added to the system by the admin will be automatically deleted after the completion of the election. Admin has to add the date when the election going to end. The system will allow the user to vote for only one candidate. The system will allow the user to vote for one time for a particular election. Admin can add any number of candidates when the new election will be announced. Admin can view the election result by using the election id. Even user can view the election result.

Keyword: Biometrics, Fingerprint, Identification.

×
IJSRED

Sameer R. Adhikari, Pallav S. Bari, Babasaheb A. Abhale, "Fingerprint Based Online Voting System" Vol 2-Issue 3 (14-18) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P4
5
Clean Brick Technology –From Design To Development
Author(s): Musaib N Bhatt
Page(s): 14-18
Abstract

This paper is a first attempt at understanding and describing the needs for design methods that have arisen in response to worldwide interests for the energy-efficient and environment-friendly brick firing technology, i.e. through the Vertical Shaft Brick Kiln (VSBK) Technology. Generally, it is understood that designing is done in order to produce drawings needed by clients and construction experts. However, in recent times with the proliferation of the need of VSBK in various countries, there has been a need to write down a standard method or recipe that can be relied upon for designing a VSBK. These design aspects are also country specific, since they depend on technical, social and geographical conditions particular to that country. Thus, the need to develop a design report, specific to Kashmir conditions was necessary. This design paper specific to Kashmir conditions is based on more than a decade long practical working experiences, researches, reports and various other technical parameters from the ground specific to Kashmir. This design paper is expected to serve as a basic tool for construction engineers and supervisors to delineate the essential parameters for the construction of a VSBK. This design paper does not claim to be complete or perfect. It is in the hands of the users to utilize it fully by using it as a reference guide for further improvement.

Keyword: Brick supporting I-beam, Flue ducts, Green brick, Ground level, Girder, Loading platform, Support Bars/ I-bar, Shaft, Shaft size, Screw supporting I-beam, Trolley track, Trolley guide, Unloading trolley.

×
IJSRED

Musaib N Bhatt, "Clean Brick Technology –From Design To Development" Vol 2-Issue 3 (19-28) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P5
6
Ben Shapiro: The Tongue Of The Devil
Author(s): Arlo Parker
Page(s): 29-36
Abstract

According to Jane Coaston, a New York Times journalist, “Ben Shapiro, the conservative writer, prides himself on speaking bold truths to liberal power. His shtick goes something like this: ‘Set up a speech in a progressive bastion, ideally a college campus full of coastal elites who have never left their bubble’” (Coaston, New York Times).

Keyword: Ben Shapiro, Caitlyn Jenner, rhetoric, debate, gender equality, equal rights, transgender rights, politics.

×
IJSRED

Arlo Parker, "Ben Shapiro: The Tongue Of The Devil" Vol 2-Issue 3 (29-36) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P6
7
The dual paradigm nature of Knowledge Event management: implications for achieving quality outcomes in Corporate Communication in Public Organizations
Author(s): Sobia Naseem , Muhammad Mohsin , Shazia Salamat , Vu Thi Duyen
Page(s): 37-47
Abstract

In this article, we analyze the rise of learning Event the board inside the professionalization of event celebrations and occasions. The developing multifaceted nature of event celebration the board places weight on associations to viably oversee 'learning' so as to succeed. Learning is ordinarily conceptualized as data that can be put away or ordered through agendas. We offer an elective conceptualization of information Event the executives as a social development molded by the authoritative culture and structure. We build up this social methodology through a contextual investigation of the Interloop Corporate Communication, Pakistan to look at the development of information Event the board jobs and duties. Our ethnographic research and subjective examination recognize how Public Company certainly uses boss learning officer, information specialist, and learning laborer jobs. These jobs were effectively performed over a brief length but then they were not characterized or explicitly stated. We examine how the non-culture and non-spatial association of work groups added to an aggregate comprehension of the benefit of sharing and making learning. With developing professionalization, we contend that event celebration associations will progressively build up an increasingly unsure consciousness of the essentialness of learning Event Management language and practice. The discoveries will empower celebration directors to more readily see how information Event Management Process are implanted inside an authoritative culture and add to hierarchical learning.

Keyword: knowledge Event management, festival organizations, professionalization, organizational culture, Corporate Communication structure.

×
IJSRED

Sobia Naseem, Muhammad Mohsin, Shazia Salamat, Vu Thi Duyen, "The dual paradigm nature of Knowledge Event management: implications for achieving quality outcomes in Corporate Communication in Public Organizations" Vol 2-Issue 3 (37-47) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P7
8
An Efficient Cluster (H-Leach) Based Routing Scheme For Wireless Sensor Networks
Author(s): Sugan J, Isaac Sajan R
Page(s): 48-52
Abstract

In Past year WSN network is used in many real time applications. The real time applications raise various fundamental problems like limited energy resources, network life time, etc. The growth of the WSN is increase day by day. In WSN has a plenty of sensor nodes. Sensor nodes are deployed to monitor the real worlds which are transmitting the sensed data to Base station. The main problem in WSN is the sensors are having limited lifetime and more energy consumption to transmit the data to Base station. This is the one of the challenge in WSN. To improve the network life time and reduce energy consumption to use clustering technique. Clustering is a process of grouping the sensor nodes into cluster. The objective of clustering is to increase the network scalability, energy efficient, etc. In this paper we propose Heterogeneous LEACH protocol we present architecture schemes and evaluate. It’s performance using analytical study and simulations. The evaluation is based on the most critical metrics in WSNs such as network lifetime, dead node, Alive node, Energy-Efficient (Energy Consumption). The evaluation and comparison with existing solutions show that our proposed Heterogeneous LEACH exhibits a reduction in energy consumption over CH-LEACH..

Keyword: WSN, Cluster, LEACH, Lifetime.

×
IJSRED

Sugan J, Isaac Sajan R, "An Efficient Cluster (H-Leach) Based Routing Scheme For Wireless Sensor Networks" Vol 2-Issue 3 (37-47) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P8
9
An Evaluation of Engaged Vs. Non-Engaged Donors and the Impact on Donations at Samaritan’s Feet International
Author(s): Arianne Goff
Page(s): 48-85
Abstract

Samaritan’s Feet is a nonprofit organization located in Charlotte, North Carolina, with the initiative of donating new athletic shoes to low income and impoverished individuals. Through activity opportunities such as shoe collection drives, shoe distributions, volunteering at the warehouse, and joining mission trips, Samaritan’s Feet engages their volunteers in a hands-on participation to serving. Such activities can provoke happiness and joy from volunteers and inspire them to donate after they have participated in a volunteer activity. Studies have shown that donors who volunteer with nonprofits are more likely to donate again. Strategic and wise nonprofit leaders must engage their volunteers soon after a volunteer activity to move them to the next checkpoint in the Donor Engagement Cycle to increase the chance of receiving additional donations. Keeping donor information categorized is also necessary for marketing to donors. This study aims to assess the correlation between volunteering and how it affects donations compared to donors who do not participate in activities. By averaging the donations of engaged and non-engaged donors in 2016 and 2018, the assessment found that volunteers who participated in an activity gave greater donations both years. This paper outlines the possible strategies for nonprofit organizations to maintain their donors with the 80-20 rule which suggests that 80% of recurring donations come from volunteers and 20% come from grants, company sponsorships, and reaching individuals who have not been involved with the organization..

Keyword: - - - .

×
IJSRED

Arianne Goff, "An Evaluation of Engaged Vs. Non-Engaged Donors and the Impact on Donations at Samaritan’s Feet International" Vol 2-Issue 3 (48-85) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P9
10
Data Mining Techniques for Handling Imbalanced Datasets: A Review
Author(s): P.Pavithra, S.Babu
Page(s): 86-90
Abstract

In today’s era of internet the amount of data generation is rapidly increasing. Some of the data related to medical, e-commerce, social networking, etc. are of great importance. But many of these datasets are imbalanced. A data set is called skewed or imbalanced when one of the classes highly dominates the others which results in poor efficiency of a classifier. To balance the imbalanced datasets we are going to analyse various methods available for balancing the datasets. About 52 research papers have been reviewed in this paper to identify the various data mining techniques to balance the imbalanced dataset.

Keyword: Imbalanced dataset, Balancing data, Data mining techniques.

×
IJSRED

P.Pavithra, S.Babu, "Data Mining Techniques for Handling Imbalanced Datasets: A Review" Vol 2-Issue 3 (86-90) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P10
11
Mobile healthcare using Internet of Things
Author(s): I.Abinaya, S.Indumathi, N.Vani
Page(s): 91-94
Abstract

Internet of Medical Things is an assortment of medical units with applications that connect hook up to healthcare IT systems through online PC networks. Medical devices designed with WiFi let the device to device interaction is the basis of IoMT. Examples of IoMT include rural patient monitoring of individual with chronic or long term conditions monitoring patient medication orders and the positioning of patients accepted to hospitals;and patient’s wearable mHealth devices, which can deliver data to care givers. IoT supporting clouds like Muzzley and AWS along with Message Queuing Telemetry Transport Protocol ensures quality of service. If any abnormal is being detected, a protocol will prudent the patient and the care giver instantaneously by sending an alert message to the care giver via the smart phone. Data security is accomplished by proper authentication and Device shadow will help to hold the persistent issue state during the intermittent connection. MQTT is preferred since it is simple to implement, light and bandwidth efficient.

Keyword: IoT,Intel Galileo,Muzzley cloud ,MQTT,AWS.

×
IJSRED

P.Pavithra, S.Babu, "Data Mining Techniques for Handling Imbalanced Datasets: A Review" Vol 2-Issue 3 (91-94) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P11
12
The Effect of Silica-Titania Catalyst Loading on the Production of Biodiesel from Palm and Waste Cooking Oil
Author(s): Zurryati, Rita Sundari, Bahrizal, Ananda Putra, Latisma DJ, Edi Nasra, Desy Kurniawati, Umar Kalmar Nizar
Page(s): 95-100
Abstract

A study about the effect silica-titania catalyst loading on biodiesel production from palm oil and waste oil has been conducted. The silica titania catalyst has been synthesized by solid state method and characterized by FTIR and DR UV-Vis to investigate the formation of Si-O-Ti bond from Si and Ti precursors. The synthesized silica-titania catalyst has been applied for biodiesel production with variation of catalyst mass to oil as to be 1%, 3%, 5%, 7% and 9%. The biodiesel products have been examined for their physical properties such as density, flow rate, and acid number. The percentage of conversion obtained to be 91% for waste cooking oil (1.33% FFA) and 33.33% for palm oil (0.374% FFA). The finding is justified that silica-titania catalyst has active acid site formed through Si-O-Ti bonding.

Keyword: Silica-Titania Catalyst, Biodiesel, Titanium Tetrahedral, Transesterification, FFA.

×
IJSRED

Zurryati, Rita Sundari, Bahrizal, Ananda Putra, Latisma DJ, Edi Nasra, Desy Kurniawati, Umar Kalmar Nizar, "The Effect of Silica-Titania Catalyst Loading on the Production of Biodiesel from Palm and Waste Cooking Oil" Vol 2-Issue 3 (95-100) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P12
13
Assam Liquor Tragedy of 2019: A perspective
Author(s): Dr. Aniruddha Kumar Baro, Dr. Pranti Dutta
Page(s): 101-104
Abstract

The incident of hooch tragedy in Assam exposed state’s inability to control excise activities and to educate people of the outcome from consuming illicit liquor. The commercialization of the liquor trade widened the scope for unethical production of alcohol which cost more than 150 lives in the district of Golaghat and Jorhat districts of Assam.

Keyword: Alcohol, Assam, tragedy, tradition, business, Death.

×
IJSRED

Dr. Aniruddha Kumar Baro, Dr. Pranti Dutta, "Assam Liquor Tragedy of 2019: A perspective" Vol 2-Issue 3 (101-104) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P13
14
A Comparative Study of Academic Achievement on Hearing Impaired and Normal Students
Author(s): Sangeeta Suman
Page(s): 105-113
Abstract

The present study was undertaken to know about comparative study of academic achievement of hearing impaired and normal students. For the present study of sample 160 students will be selected. In the present study purposive sampling technique will be used. The study focuses on the actual need of hearing impaired students for academics. To take them in mainstream, we should aware about their special need. The finding of the study revealed that academic achievement will be low in hearing impaired students due to language barrier and much more. If the gap is fulfilled by trained and skilled teacher they can also do better in academics.

Keyword: Academic achievement, Hearing impaired students , normal students.

×
IJSRED

Sangeeta Suman, "A Comparative Study of Academic Achievement on Hearing Impaired and Normal Students" Vol 2-Issue 3 (105-113) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P14
15
Performance Analysis of Water-in-glass Evacuated Tube Solar Water Heater
Author(s): Nikhil Chandratre, SandeshGaikwad,d ChaitanyaGirase, Dinesh Khairnar, B. P. Kumbhare
Page(s): 114-118
Abstract

It is necessary to develop a technique of receiving and storing solar energy efficiently. Extensive research work is taking place worldwide in the area of Solar Water Heaters. The project aims at studying the performance of water-in-glass evacuated tube solar water heater and to analyze the results obtained from the experimentation, which involves tilting evacuated tube at different angles and measuring the temperature of water in the tank over the period of time. Temperature is sensed by a suitable temperature sensor and those values are recorded manually. Those recorded values then used to obtain relationships between the inclination angle, temperature attained in the tank. A MATLAB code is used to plot temperature characteristics and calculate heat transfer coefficient. It also involves the determination of Heat gain and Heat loss from the tube at various angles of inclination during operation and suggesting the appropriate inclination angle with an efficiency point of view.

Keyword: Evacuated tube collector, Solar water heater, Tube tilt angle, Thermal Performance.

×
IJSRED

Nikhil Chandratre, SandeshGaikwad,d ChaitanyaGirase, Dinesh Khairnar, B. P. Kumbhare "Performance Analysis of Water-in-glass Evacuated Tube Solar Water Heater" Vol 2-Issue 3 (114-118) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P15
16
Content Based Retrieval and Classification of Images Using Hybrid of HMMD Color Space
Author(s): Jasmeet Singh
Page(s): 119-126
Abstract

With the development of the Internet, and the availability of image capturing devices such as digital cameras, image scanners, the size of digital image collection is increasing rapidly.. In CBIR, images are indexed by their visual content. Content based image retrieval consists of three parts: feature extraction, indexing and retrieval part. The techniques which are used to extract features of an image are called feature extraction techniques. The choice of features plays an important role in image retrieval. Some of the features used are color, texture and shape. Combination of these features provides better performance than single feature. Here we are extracting color mean features and color standard deviation feature with the proposed method consists of HMMD (Hue Min Max Difference) color plane. It is proved in research work that HMMD along with color mean features and color standard deviation feature is tend to reduced the size of feature vectors, storage space and gives high performance than, RGB-color mean feature. Further, HMMD color space model will be used to improve the feature extraction and improve the precision. At the end, results are presented to show the efficacy of the proposed method.

Keyword: CBIR, HMMD,Content based image classification, Feature Extraction, Color Features, Naive Bayesian Classifier.

×
IJSRED

Jasmeet Singh, "Content Based Retrieval and Classification of Images Using Hybrid of HMMD Color Space" Vol 2-Issue 3 (119-126) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P16
17
Effects of Flow-Field Design on the Performance Characteristic of Proton Exchange Membrane Fuel Cells
Author(s): HoaBinh Pham, Thanh Cong Doan
Page(s): 127-130
Abstract

Flow-field design of the bipolar plate plays an important role in the operation of proton exchange membrane fuel cells (PEMFC), it contributes reactants through gas diffusion layers (GDL) to the membrane electrolyte assembly (MEA), current collection, providing structural support to the MEA, water management & thermal management and so on. As a result, the flow-field design entails the design of the flow fields on both surfaces of the plate with optimum design parameters to assume responsibility for the stability and high performance of fuel cell. In this paper, numerical analysis-based design of the bipolar plate is investigated to enhance the performance of PEM fuel cell through a comparative evaluation of the fuel cell performance when flexibility using the serpentine flow-field and the serpentine flow field with sub-channels design for anode and cathode bipolar plate. The results show that using the serpentine flow-field with design as the bipolar plates appropriately have many advantages in preventing the cathode flooding and anode drying; as a result, improving fuel cell performance..

Keyword: Proton exchange membrane, flow field pattern, temperature field, polymer electrolyte membrane, Computational Fluid Dynamics.

×
IJSRED

HoaBinh Pham, Thanh Cong Doan, "Effects of Flow-Field Design on the Performance Characteristic of Proton Exchange Membrane Fuel Cells" Vol 2-Issue 3 (127-130) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P17
18
Non-Human Land Drone for Soldier and Border Security, Surveillance and Navigation System
Author(s): Mrs. Kokila K S, Ravikumar G N, Mujahid, Prasad M B, Supreeth B H
Page(s): 131-135
Abstract

The military forces continuously tried to use new gadgets and weapons for reducing the chance of their casualties and to defeat their enemies. With the event of subtle technology, it principally depends on the high school weapons or machinery being employed. AI is one amongst the recent fields of recent age during which the nations area unit concentrating upon for military functions within the state of war and peace. they need been in use for a few time for demining and rescue operations however currently they're beneath analysis for combat or spy missions. within the future they'll be used for intelligence and police work, supplying and support, communications infrastructure, forward-deployed offensive operations, and as military science decoys to hide planner by manned assets. so as to create robots for the unheralded untidy atmosphere of the parcel, analysis on totally different aspects of robots is beneath investigation in laboratories to be able to do its job autonomously, as expeditiously as somebody's operated machine will do...

Keyword: DC Motor, GPS, GSM, Gas sensor, IR senor, Metal detector sensor, Motor driver,Navigation system, Surveillance, Temperature sensor..

×
IJSRED

Mrs. Kokila K S, Ravikumar G N, Mujahid, Prasad M B, Supreeth B H, "Non-Human Land Drone for Soldier and Border Security, Surveillance and Navigation System" Vol 2-Issue 3 (131-135) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P18
19
GLCM-LBP Plant Leaf Disease Detection
Author(s): Samiksha Devi, Ritika, Bhanu Gupta
Page(s): 136-140
Abstract

Agriculture is the backbone of the nation as it provides food and job opportunity to the humankinds and directly contributes to the economic growth of the nation. In agriculture, plant disease identification is more important one. If the diseases can be prevented early that would be more to helpful to farmers to save the crops. This paper presents as system for identification of disease of the plant by using symptoms on leaves. There are several methods reported in the literature to identify the disease. Moreover, many researchers paid their attention in identification of plant leaf disease and some of them used image processing and machine learning techniques to perform the disease prediction. This work presents a review on identification of plant disease using image processing and recognition. Disease detection involves the steps like image acquisition, image pre-processing, image segmentation, feature extraction and classification. Image processing is a method to covert an image into digital form and performs some operation on it. Feature extraction start from an initial set of measured data and builds derived values (features) intended to be informative and non–redundant, facilitating the subsequent learning and generalization steps, and in some cases leading to better human interpretation. The system applies GLCM and LBP for plant disease feature extraction using MATLAB.

Keyword: Plant Disease, GLCM, LBP, MATLAB.

×
IJSRED

Samiksha Devi, Ritika, Bhanu Gupta, "GLCM-LBP Plant Leaf Disease Detection" Vol 2-Issue 3 (136-140) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P19
20
Smart Soldier Jacket
Author(s): Mrs. Nandini S, Puneeth U E, Sudarshan H S, Sachin H K, Shivakumar A N
Page(s): 141-145
Abstract

As the climatic conditions are changing rapidly, the winters are getting much colder, especially in northern region and the western region of India. Since we developed a smart army jacket using control media devices such as GSM, GPS, and SENSORS in the jacket. The smart army jacket aims for providing reliable health monitoring as well as position tracking of soldier. Some of climatically conditions are led to. unfortunate deaths of soldiers. This jacket can automatically sense the temperature inside, outside using temperature sensors. We are using coils for heating purpose and the temperature of the coil will depends on the outer temperature. GPS, GSM are the models used for communication purpose. Hence for monitoring the health and the heart rate of the soldier health monitoring equipment sensors are been establish in the jacket as well.

Keyword: Atmega328 microcontroller, Electric coils, Arduino uno, GPS and GSM modules, LM35,temperature sensor, Heartbeat sensor, battery, etcs.

×
IJSRED

Mrs. Nandini S, Puneeth U E, Sudarshan H S, Sachin H K, Shivakumar A N, "Smart Soldier Jacket" Vol 2-Issue 3 (141-145) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P20
21
Autonomous Rubik’s Cube Solver Bot
Author(s): S. P. Rohith, A. Mohamed Sharif, S. Jayasankar, M. Harikrishnan
Page(s): 146-151
Abstract

Rubik’s cube is considered to be the most challenging puzzle developed for humans. Building a robot to solve such a puzzle is a challenging task. In this paper, the design of such an Autonomous Rubik’s cube solver using Arduino Mega 2560 has been discussed. The paper deals with the overall process flow for solving the cube. Color recognition is used for detecting the initial orientation of the cube. Segmentation is used to obtain the HSV mask and thus the color pattern of the scrambled cube. Dot sampling is incorporated to improve the accuracy of the color recognition and segmentation processes. Finally, the categories of solution using Layer by Layer (LBL) algorithm for solving the cube has been shown.

Keyword: Autonomous System, Color Recognition, Dot Sampling, Rubik’s cube.

×
IJSRED

S. P. Rohith, A. Mohamed Sharif, S. Jayasankar, M. Harikrishnan, "Autonomous Rubik’s Cube Solver Bot" Vol 2-Issue 3 (146-151) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P21
22
Telemedicine Application Based Automatic Eye Cataract Detection Algorithm Using MATLAB
Author(s): Ms. Prafulla P S, Kavyashree K T, Arpitha P, Sowmya T S, Nireeksha M Y
Page(s): 152-156
Abstract

This paper proposes and evaluates an algorithm to automatically detect the cataracts from color images in adult human subjects. Currently, methods available for cataract detection are based on the use of either fundus camera or Digital Single-Lens Reflex (DSLR) camera; both are very expensive. The main motive behind this work is to develop an inexpensive, robust and convenient algorithm which in conjugation with suitable devices will be able to diagnose the presence of cataract from the true color images of an eye. An algorithm is proposed for cataract screening based on texture features: uniformity, intensity and standard deviation. These features are first computed and mapped with diagnostic opinion by the eye expert to define the basic threshold of screening system and later tested on real subjects in an eye clinic. Finally, a tele-ophthalmology model using our proposed system has been suggested, which confirms the telemedicine application of the proposed system.

Keyword: Tele-ophthalmology, Digital Single-Lens Reflex (DSLR) camera, SVM Classifier.

×
IJSRED

Ms. Prafulla P S, Kavyashree K T, Arpitha P, Sowmya T S, Nireeksha M Y, "Telemedicine Application Based Automatic Eye Cataract Detection Algorithm Using MATLAB" Vol 2-Issue 3 (152-156) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P22
23
A Data Mining Approach of Detection of Fake News on Social Media
Author(s): B.Umamaheswari, Dr. Vijeta Kumawat
Page(s): 157-160
Abstract

The advantage of easy accessibility, less expensive and faster reach to more people in less time has made the news on social media gaining popularity in recent years but at the same time it faced the problem on quality of news spread compared to other standard traditional media such as newspaper and TV channels. How the people are victimized by the fake news is the major concern. Also identifying such fake news has become almost a challenge. In this paper we will see how data mining is providing solution to identify fake news on social media.

Keyword: Fake news, Traditional media, social media , detection.

×
IJSRED

B.Umamaheswari, Dr. Vijeta Kumawat, "A Data Mining Approach of Detection of Fake News on Social Media" Vol 2-Issue 3 (157-160) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P23
24
A Step Forward to a Smart Grid by Implanting Smart Monitoring System
Author(s): V.Prasath, Dr.V.Chandrasekar, Mrs.N.Pushpalatha, Mr.S.Sheikameer Batcha
Page(s): 161-167
Abstract

By development of smart Grid, renewable energy such as wind generation (WG) and photovoltaic generation (PV) are getting attention in distributionsystems. Additionally, all-electric apartment houses or residence such as DC smart houses are increasing.However, due to the fluctuating power from renewable energy sources and loads, supply-demandbalancing of power system becomes problematic. Smart grid is a solution to this problem. This paperpresents a methodology for optimal operations of a smart grid, to minimize the power flow fluctuation by reduceinterconnection point and over load connection. To achieve the proposed optimal operation, we use distributed controllable loadssuch as halogen lamps and fans. By minimizing the interconnection point and over load, it is possible to reduce the electric power consumption and the cost of electricity. This system consists of battery, solar collector, and load.Energy efficient smart buildings are possible by integrating smart meter, smart sockets, domestic renewableenergy generation and energy storage systems for integrated energy management, and this integratedsystem supports demand side load management, distributed generation and distributed storageprovisions of future smart grids. Coming era of smart grids has implications for domestic DC distributionconcepts with smarts sockets.

Keyword: DC distribution Home electronics appliances Smart buildings and systems Demand side load management Smart grid DC smart house optimal operation Interconnection point power flow and load shedding.

×
IJSRED

V.Prasath, Dr.V.Chandrasekar, Mrs.N.Pushpalatha, Mr.S.Sheikameer Batcha, "A Step Forward to a Smart Grid by Implanting Smart Monitoring System" Vol 2-Issue 3 (161-167) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P24
25
Analysis Factors Influencing the Adoption of Mobile Payment Using the UTAUT2 Model (A Case Study of OVO in Indonesia)
Author(s): Eka Latifah Anggraini, Indira Rachmawati
Page(s): 168-175
Abstract

Although it is already proven that the growth of non-cash transaction promotes economic efficiency, the percentage of non-cash instruments used in Indonesia is still low compared to the internet or smartphone penetrations. Thus, to analyze one of the non-cash instruments adoption rate, the researcher conducted research using OVO application as the object. This research aims to find out the factors influencing the adoption of OVO in Indonesia using the UTAUT2 model and provide suggestion to the company related to respondents’ perception toward it. Based on the 400 valid responses, the results show that most of the variables in UTAUT2 model (social influence (SI), facilitating conditions (FC), hedonic motivation (HM), price value (PV), behavioral intention (BI), and trust (TR)) have a positive influence on the adoption variable except for performance expectancy (PE) and effort expectancy (EE) variables. It also shows that facilitating conditions (FC) are the key determinant of customers' intention to use the services.

Keyword: Adoption, Non-cash Transaction, OVO, UTAUT2, Indonesia.

×
IJSRED

Eka Latifah Anggraini, Indira Rachmawati, "Analysis Factors Influencing the Adoption of Mobile Payment Using the UTAUT2 Model (A Case Study of OVO in Indonesia)" Vol 2-Issue 3 (168-175) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P25
26
Survey: Sentiment Stress Identification Using Tensi/Strength Framework
Author(s): Mrs. Reshma Radheshamjee Baheti, Prof. S.A.Kinariwala
Page(s): 176-180
Abstract

Although it is already proven that the growth of non-cash transaction promotes economic efficiency, the percentage of non-cash instruments used in Indonesia is still low compared to the internet or smartphone penetrations. Thus, to analyze one of the non-cash instruments adoption rate, the researcher conducted research using OVO application as the object. This research aims to find out the factors influencing the adoption of OVO in Indonesia using the UTAUT2 model and provide suggestion to the company related to respondents’ perception toward it. Based on the 400 valid responses, the results show that most of the variables in UTAUT2 model (social influence (SI), facilitating conditions (FC), hedonic motivation (HM), price value (PV), behavioral intention (BI), and trust (TR)) have a positive influence on the adoption variable except for performance expectancy (PE) and effort expectancy (EE) variables. It also shows that facilitating conditions (FC) are the key determinant of customers' intention to use the services.

Keyword: Adoption, Non-cash Transaction, OVO, UTAUT2, Indonesia.

×
IJSRED

Mrs. Reshma Radheshamjee Baheti, Prof. S.A.Kinariwala, "Survey: Sentiment Stress Identification Using Tensi/Strength Framework" Vol 2-Issue 3 (176-180) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P26
27
Applications of Information Retrieval for Afaan Oromo text based on Semantic based Indexing
Author(s): Berhanu Anbase
Page(s): 181-274
Abstract

As storage becomes more sufficient and less expensive, the amount of information retained by businesses and institutions is likely to increase. For these increasing amounts of information, they need efficient and effective index structure when we have to find needed information. Indexing is an offline process for organizing collection of documents using indexing structure such as Inverted file, sequential files and signature file to save storage memory space and speed up searching time.However, since there are usually many ways to express the same concept, the terms in the users query may not appear in a relevant document. Alternatively, many words can have more than one meaning. So the standard information retrieval models (e.g., Boolean, standard vector, probabilistic) treat words as if they are independent, although it is quite obvious that they are not.Due to these facts term matching methods are likely to miss relevant documents and also retrieve irrelevant ones. Therefore, to solve this issue, we have developed Applications of Information Retrieval for Afaan Oromo text based on Semantic-based Indexing. This technique of information retrieval can partially handle these problems by organizing terms and documents into a semantic based indexing structure more appropriate for information retrieval. Semantic indexing information retrieval is a new technique which is based on vector representation of documents and user‟s query. Because it uses concepts or topics instead of each words to index and retrieve the documents, consequently allowing a relevant document to be retrieved even when it shares no common words with in the query.In this study, the potential of applications of Latent Semantic indexing approach in Afaan Oromoo text retrieval is investigated. 70 Afaan Oromoo documents and nine (9) queries were used to test the approach. Automatic indexing of the documents resulted in some unique terms which are not in the stop-word list used for the thesis. Singular value decomposition (SVD) of the term by document matrix is used for indexing and retrieval system. The performance of the system after User Relevance Feedback is measured using recall and precision. Therefore; the experiment shows that the performance of the prototype is on the average 0.67(67%) precision and 0.63(63%) recall registered. Finally, the recommendations can be forwarded based on the applications resource that the performance of the LSI system can be improved by designing good stemmer and standard corpus for Afaan Oromoo languages..

Keyword: Information Retrieval, Afaan Oromo, Latent Semantic indexing, Singular Value Decomposition.

×
IJSRED

Berhanu Anbase, "Applications of Information Retrieval for Afaan Oromo text based on Semantic based Indexing" Vol 2-Issue 3 (181-274) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P27
28
Effect of Stiffness on Different Shapes of Building to Seismic Zones
Author(s): Avantika H. Dahikar, Valsson Varghese ,Vinayak D. Vaidya
Page(s): 275-287
Abstract

The objective is to conduct a literature review to provide importance to develop a computational model on which linear/non-linear, static/ dynamic analysis is performed. The first part of this chapter presents a summary of various parameters defining the computational models, the basic assumptions and the geometry of the selected building considered for this study.Analysis of any structure for resisting earthquake is the basic need of this study. In this project analysis of a seismic resistant structure is a need of concern, and thereby establishing a comparison between structures with different plan geometry. Here the study is carried out for the behaviour of G + 5 H shaped buildings. The proposed H shaped building size is 29 x 35 m and also properties are defined for the building structure. The model of the building is created in STAAD Pro software . The properties are defined as per IS 1893: 2002 part1. The seismic zone considered for the model of building are in IV zone and soil type is medium. The modelling of building is done for Indian seismic zone IV IS1893 -2002.For given structure loading with applied loads includes live load, earthquake zone and dead load accordingly .Load consumptions are also provided according to the IS1893(part 1):2002.The analysis is carried out to determine max node, displacement and base shear ,stiffness. After analysis results are obtained in the form of graphs which are in turn observed to form conclusions.

Keyword: - - -.

×
IJSRED

Avantika H. Dahikar, Valsson Varghese ,Vinayak D. Vaidya, "Effect of Stiffness on Different Shapes of Building to Seismic Zones" Vol 2-Issue 3 (275-287) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P28
29
RP-90: Formulation of Two Special Classes of Standard Cubic Congruence of Composite Modulus- A Power of Three
Author(s): B M Roy
Page(s): 288-291
Abstract

In this paper, two special types of standard cubic congruence of composite modulus—a power of three, are considered for study and are formulated. Formulation of the solutions is proved time-saving, simple and quick. It made finding solutions of cubic congruence of composite modulus easy. Solutions can also be obtained orally. Formulation is the merit of the paper.

Keyword: Binomial Theorem, Cubic Congruence, Composite Modulus.

×
IJSRED

B M Roy, "RP-90: Formulation of Two Special Classes of Standard Cubic Congruence of Composite Modulus- A Power of Three" Vol 2-Issue 3 (288-291) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P29
30
The Extent and Significance of the Drivers of Adoption-Use of Open Source ERP by Deposit Taking Saccos in Kenya
Author(s): James Mwikya Reuben, Dr. Johnmark Obura, Dr. Moses Oginda
Page(s): 292-310
Abstract

In this paper, two special types of standard cubic congruence of composite modulus—a power of three, are considered for study and are formulated. Formulation of the solutions is proved time-saving, simple and quick. It made finding solutions of cubic congruence of composite modulus easy. Solutions can also be obtained orally. Formulation is the merit of the paper.

Keyword: Binomial Theorem, Cubic Congruence, Composite Modulus.

×
IJSRED

James Mwikya Reuben, Dr. Johnmark Obura, Dr. Moses Oginda, "The Extent and Significance of the Drivers of Adoption-Use of Open Source ERP by Deposit Taking Saccos in Kenya" Vol 2-Issue 3 (292-310) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P30
31
Smart School Bus Monitoring System Using RFID
Author(s): Swapnali Nikam, Ashwini Khaire,Rupali Surse,Bhagyasri Kothawade
Page(s): 311-316
Abstract

On reviewing the past work of school bus tracking, monitoring and alerting system, there is a possibility to categorize various methodologies and identify new trends. One among them is a challenge for vehicle tracking, monitoring and alerting system. Now-a-days with the increase in the crime rate and accidents, Student often get on the wrong buses and get off at the wrong stop. Bus drivers may be unable to identify all student and will not know in time if a student is missing. Parents have no way of knowing if there ward is safe until the evening when the returns there is no provision to monitor driving with in speed limit unscheduled deviation. School student aren’t allow phones. Working parents have no way of knowing if and when there kids get home. There is no reliable method for tackling delays or accidents, which further aggravate parents. This project makes use of the applicability of radio frequency identification (RFID) technology for tracking and monitoring children during their trip to and from school on school buses. And it has the advantage of efficient tracking capabilities, low cost and easy maintenance. The RFID tags are effective and it is used for tracking and monitoring children. Fire sensor is also used in this project to detect any fire accidents. send a message to the parents through SMS. The system consists of three main units, bus unit, parent unit and school unit. The bus unit is used to detect when a child enters/exits from the bus using RFID Card. This information is communicated to the parent unit and school unit that identify the presence of children . The system tracks the school bus by the IOT.

Keyword: Global Position System, Radio Frequency Identification, PIC16F877A microcontroller, Sensors. .

×
IJSRED

Swapnali Nikam, Ashwini Khaire,Rupali Surse,Bhagyasri Kothawade, "Smart School Bus Monitoring System Using RFID" Vol 2-Issue 3 (311-316) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P31
32
Trend Analysis of Coral Reef Presence in ST. Martin’s Island
Author(s): Md Atiqur Rahman, Shoyeb Muhammad Musfique
Page(s): 317-321
Abstract

Land use is a continuous and ever changing process. Remote sensing and GIS technique supplemented by ground truth data have been used to prepare land use map of St. Martin’s Island. The land use map shows the change of coral quantity of the Island. Medium scale Landsat TM, and OLI/TIRS satellite imageries were used for this study. There are different type of land use has identified but coral reef are found around most of the island. The land area used of coral reef decreases 0.81% has found during analysis of land use map. This change has made in a 10 years period.

Keyword: Remote sensing and GIS, Land use, Coral reef.

×
IJSRED

Md Atiqur Rahman, Shoyeb Muhammad Musfique, "Trend Analysis of Coral Reef Presence in ST. Martin’s Island" Vol 2-Issue 3 (317-321) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P32
33
IOT Based Illegal Tree Cutting Prevention and Monitoring with Web Application
Author(s): Raghavendra L R ,Vivek B T ,Suhas Gowda K R, Vijay Kumar M, Vineeth M S
Page(s): 322-328
Abstract

The trafficking of trees is a very long and regretful issue. Cutting of trees like Red sanders, Teak wood, Sandal wood are still a great difficult. In spite of increasing technology, safety for trees in a large area like forest is hard. It is also luxurious to implement. We are making a system that can avoid the trafficking of trees in forest. The systems comprise of Raspberry pi interfaced with flex sensor, fire sensor, and Relay. In case of problems the tree unit module along with the particular geographical location using GSM. And also real time data is being reorganized from the tree unit to the monitoring section using IOT. This safeguards data security and provides privacy.

Keyword: trees, accessible, smuggling, woods, forest.

×
IJSRED

Raghavendra L R ,Vivek B T ,Suhas Gowda K R, Vijay Kumar M, Vineeth M S, "IOT Based Illegal Tree Cutting Prevention and Monitoring with Web Application" Vol 2-Issue 3 (322-328) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P33
34
Delays in Construction Projects: Analysis of Critical Risk Factors in Small Brazilian Companies
Author(s): Andrey Pimentel Aleluia Freitas, Joao Alberto Neves dos Santos, Joaquim Teixeira Netto, Nylvandir Liberato Fernandes de Oliveira
Page(s): 329-338
Abstract

The risks in the construction sector present complexity in the operational processes that usually affect the deadlines in the project schedules. Although risk management composes the structure of project management, its operationalization is not adopted by many companies in the sector, especially the smaller ones. This article aims to identify and prioritize the main risk factors that have an impact on the delays in the construction projects of the small construction companies in Basil. Based on the literature, 43 risk factors associated with the construction environment were identified, however, after the application of a preliminary questionnaire, only 26 factors were directly related to delays in the projects of small construction companies. A survey was applied to 133 professionals working in small builders. After verifying the content validity and consistency of the instrument, the data obtained were a normal distribution. Through exploratory factor analysis, six critical risk factors were identified and hierarchized, according to their levels of relevance for professionals in the sector. The results presented aim to contribute to the effectiveness of the risk management processes, to minimize the factors that potentiate the risk of delay in small projects in the construction sector.

Keyword: Construction projects, Factor analysis, Project delays, Risk factors.

×
IJSRED

Andrey Pimentel Aleluia Freitas, Joao Alberto Neves dos Santos, Joaquim Teixeira Netto, Nylvandir Liberato Fernandes de Oliveira "Delays in Construction Projects: Analysis of Critical Risk Factors in Small Brazilian Companies" Vol 2-Issue 3 (329-338) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P34
35
Tree Leaves And Fruits Disease Detection Using Convolutional Neural Networks
Author(s): Nivetha.I, Dr.Padmaa.M
Page(s): 339-342
Abstract

The purpose of Agriculture is growing the plants and feed the people. But it’s an essential source of energy and a solution to solve the difficulty of global warming. Plant diseases are extremely full size, as that may adversely affect both best and quantity of vegetation in agriculture manufacturing. Plant sickness prognosis may be very critical in earlier degree as a way to cure and manipulate them. Tree leaves and fruit diseases can increase the cost of agricultural production and may extend to total economic calamity of a producer if not cured appropriately at beginning stage. It includes image segmentation and image classification approach to predict various types of diseases using Otsu thresholding method and Convolutional neural network.

Keyword: Apple, grape, pomegranate fruits and leaves images with disease, Feature extraction,Classification, Convolutional Neural Network, Disease detection.

×
IJSRED

Nivetha.I, Dr.Padmaa.M "Tree Leaves And Fruits Disease Detection Using Convolutional Neural Networks" Vol 2-Issue 3 (339-342) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P35
36
Statistical Modelling and Optimization of the Performance Enhancement of Ubakala Clay for Use as Drilling Mud
Author(s): Allison,F.N, Nwanekezie,M.N, Osoka,E.C
Page(s): 343-347
Abstract

This work studied the performance enhancement of Ubakala clay for use as drilling mud. A clay sample was collected from Ubakala in Abia State of Nigeria, processed and beneficiated with varying concentrations of soda ash (0-6wt %). Experiments were conducted to determine the viscosities of the control and clay-soda ash mixture at different curing time intervals (0-8hours), temperatures (30OC-90OC) and speed of agitation (100rpm-600rpm). Response surface methodology, with the aid of MATLAB statistical toolbox was used to perform a statistical study and optimization of the data obtained from the study. The results revealed that soda ash concentrations, temperature, curing time and their interactions terms are significant variables in the statistical model with temperature being the most significant term, while time is the least significant term. The graphical representation of the control showed a decreasing rate in viscosity within the required range of speed of agitation unlike those of the clay- soda ash mixture. The optimum predicted value of yield stress occurs for a curing time of 8hours, temperature of 900C and soda ash concentration of 5.183wt% and this is recommended as the operating parameters for enhancing the performance of Ubakala clay sample for use as a drilling mud.

Keyword: clay, drilling mud, rheological study, model, viscosity, optimization.

×
IJSRED

Allison,F.N, Nwanekezie,M.N, Osoka,E.C "Statistical Modelling and Optimization of the Performance Enhancement of Ubakala Clay for Use as Drilling Mud" Vol 2-Issue 3 (343-347) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P36
37
A Survey of Broadband Situations in Rural and Remote Areas: A Case Study of Sambisa Forest in Northeast Nigeria
Author(s): Ifeanyi B.Ezugwu, Brice Noumsi Damien, Oladejo M.Comfort
Page(s): 348-354
Abstract

There has been a growing raise in the use of mobile smart devices for accessing of the internet in present times. Therefore, provision of affordable and reliable internet access to rural areas will go a long way to boost socio economic development of such areas. It is important to note that insurgency and violence is one of the factors prevailing against infrastructural development in many rural and remote communities in developing countries. Sambisa forest in the north-eastern Nigeria is one of such remote arears that has been very negatively affected by insecurity, insurgence and violence. This paper presents broadband communications as a low cost alternative to the challenges inherent with providing fibre-optics based terrestrial internet links to areas that are highly prone to insurgency and violence.It also presents satellite and worldwide interoperability for microwave access (WiMAX) technologies as a suitable solution to the problem of reliable and affordable high speed internet access in the Sambisa area. These two technologies proposed in this study will provide a wider coverage area and eliminate the seemingly communication and social development problems in Sambisa forest.

Keyword: Sambisa, VSAT, DSL, WiMAX.

×
IJSRED

Ifeanyi B.Ezugwu, Brice Noumsi Damien, Oladejo M.Comfort "Statistical Modelling and Optimization of the Performance Enhancement of Ubakala Clay for Use as Drilling Mud" Vol 2-Issue 3 (348-354) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P37
38
Investigation of Machinery Health Analysing Characteristics of Vibration Using Comprehensive Experimental Setup
Author(s): Arifur Rahman, Md. Emdadul Hoque, Shaikh Sumit Noor
Page(s): 348-354
Abstract

The goal of this paper is to interpret the condition of a machine by investigating the experimental data obtained using CSI 2140 machinery health analyzer from a multi-functioning arrangement. The multi-functioning arrangement consists of pulleys, shafts, ball-bearings, overhung impeller and an electric motor as a power source. These elements generate different forms of vibrational complications. These complications are measured in terms of frequency, amplitude and phase angle and compared with the ISO standard to determine machinery health. The Analyzer helps for the exact determination of the characteristics of the vibration. An experimental setup has been designed and fabricated to create and solve the vibrational complexities. In this research, mass imbalance has been detected and figured out the proper measures such as the polar plot analysis to reduce the severity of vibration and attain the desired level of the vibration according to ISO standard.

Keyword: Vibration analysis, Mass imbalance, Machinery health, Condition monitoring.

×
IJSRED

Arifur Rahman, Md. Emdadul Hoque, Shaikh Sumit Noor "Investigation of Machinery Health Analysing Characteristics of Vibration Using Comprehensive Experimental Setup" Vol 2-Issue 3 (355-361) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P38
39
Preparation and Characterization of Activated Carbon From Cacao Shell (Theobroma cacao L.)
Author(s): Rizqika Ulfah, Ananda Putra
Page(s): 362-370
Abstract

The goal of this paper is to interpret the condition of a machine by investigating the experimental data obtained using CSI 2140 machinery health analyzer from a multi-functioning arrangement. The multi-functioning arrangement consists of pulleys, shafts, ball-bearings, overhung impeller and an electric motor as a power source. These elements generate different forms of vibrational complications. These complications are measured in terms of frequency, amplitude and phase angle and compared with the ISO standard to determine machinery health. The Analyzer helps for the exact determination of the characteristics of the vibration. An experimental setup has been designed and fabricated to create and solve the vibrational complexities. In this research, mass imbalance has been detected and figured out the proper measures such as the polar plot analysis to reduce the severity of vibration and attain the desired level of the vibration according to ISO standard.

Keyword: Vibration analysis, Mass imbalance, Machinery health, Condition monitoring.

×
IJSRED

Rizqika Ulfah, Ananda Putra "Preparation and Characterization of Activated Carbon From Cacao Shell (Theobroma cacao L.)" Vol 2-Issue 3 (362-370) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P39
40
Opinion Mining and Predicting Reviews for E-commerce
Author(s): Sayli A.Hon, Pritee V.Shirsath, Sheetal K.Pendhari, Rupali R.Bhorkade
Page(s): 371-374
Abstract

Online business is the easiest way of shopping. In online business, users can buy the products by viewing the feedbacks or reviews of the other users who are used the products earlier. Based on those opinions the product can get rank. But the user has to read a lot of reviews for a particular product in order to get the best product. It was the time taking process. In this paper we are supposed to propose a system that we can directly collect the reviews of the products from online and by comparing those reviews we can get the best product based on the good opinions given by earlier users of that product.

Keyword: feedback,reviews, aspect mining, online business.

×
IJSRED

Sayli A.Hon, Pritee V.Shirsath, Sheetal K.Pendhari, Rupali R.Bhorkade "Opinion Mining and Predicting Reviews for E-commerce" Vol 2-Issue 3 (371-374) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P40
41
Iot Implementation for Preventing Two-Wheeler Accident Detection with Call Control
Author(s): Deepak K C, Rakesh B K, Faisal Ahmed, DR. Prabhanjan S
Page(s): 375-383
Abstract

The system is to build a safety system, which is integrated with the smart system and intelligent bike to reduce the probability of two-wheeler accidents and drunk, and drive cases. Alcohol sensors detect the alcoholic content in the rider’s breath. When the rider is on the bike if there is alcohol content found in rider’s breath, the bike remains off. The bike will not start until the rider blows the air and if there is no alcoholic content present stating that rider did not consume alcohol.When the rider crashes, bike hits the ground and sensors detect the motion, tilt of bike, and report the occurrence of an accident and sends information of the location of accident to the family members of the rider and the emergency contact numbers.

Keyword: Intelligent, integrated, sensors, mobile application, safety system.

×
IJSRED

Deepak K C, Rakesh B K, Faisal Ahmed, DR. Prabhanjan S "Iot Implementation for Preventing Two-Wheeler Accident Detection with Call Control" Vol 2-Issue 3 (375-383) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P41
42
Impact of Packaging Factors on Consumer Behaviour: A Study on FMCG stock
Author(s): Maloth Naresh Naik, Dr. Rambabu Lavuri
Page(s): 384-394
Abstract

Product Packaging is assumed a crucial job in the manufacture an appropriate affordable favourable position and it is one of the significant devices for advertising to impart the intended interest group by best bundling variables. The point of paper is to examine the variables of FMCG item bundling. The motivation behind this paper is to assess the effect of packaging factors on buy conduct of buyers towards chose FMCG stocks. In the extent of study was restricted to Hyderabad city. A structure poll was utilized to gauge the effect of bundling factors on buy conduct of shoppers and each age of the individual was focused in this examination consider for to get the buy conduct of purchaser towards FMCG with chose items, with test measure 825 respondents and tried through expressive insights, rates, ANOVA, connection and different relapse investigation by utilizing SPSS 20.0 Version. The consequence of the examination demonstrated that, HO1 reveals that there is a measurable hugeness of item related factors on the statistic elements of customers and pursued. With H02, there are an essentials effect of FMCG Packaging factors on the buyer purchasing conduct and connection results demonstrates that their solid connection between the education and Income in rupees with the packaging variables, and packaging factors like Product Safety, eco-friendly packaging, quality bundling having great relationship with the buy conduct of the buyers.

Keyword: Packaging, Product, Product Safety, Eco-friendly packaging, quality packaging, consumer behaviour.

×
IJSRED

Maloth Naresh Naik, Dr. Rambabu Lavuri "Impact of Packaging Factors on Consumer Behaviour: A Study on FMCG stock" Vol 2-Issue 3 (384-394) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P42
43
A Survey Paper On Twitter Data Analysis And Visualization Using The R Language With Hadoop
Author(s): Chincholkar A.B, Pardeshi Nisha, Dabhade Madhuri, Jadhav Vrushali, Sayyad Farhin
Page(s): 395-400
Abstract

Product Packaging is assumed a crucial job in the manufacture an appropriate affordable favourable position and it is one of the significant devices for advertising to impart the intended interest group by best bundling variables. The point of paper is to examine the variables of FMCG item bundling. The motivation behind this paper is to assess the effect of packaging factors on buy conduct of buyers towards chose FMCG stocks. In the extent of study was restricted to Hyderabad city. A structure poll was utilized to gauge the effect of bundling factors on buy conduct of shoppers and each age of the individual was focused in this examination consider for to get the buy conduct of purchaser towards FMCG with chose items, with test measure 825 respondents and tried through expressive insights, rates, ANOVA, connection and different relapse investigation by utilizing SPSS 20.0 Version. The consequence of the examination demonstrated that, HO1 reveals that there is a measurable hugeness of item related factors on the statistic elements of customers and pursued. With H02, there are an essentials effect of FMCG Packaging factors on the buyer purchasing conduct and connection results demonstrates that their solid connection between the education and Income in rupees with the packaging variables, and packaging factors like Product Safety, eco-friendly packaging, quality bundling having great relationship with the buy conduct of the buyers.

Keyword: Packaging, Product, Product Safety, Eco-friendly packaging, quality packaging, consumer behaviour.

×
IJSRED

Chincholkar A.B, Pardeshi Nisha, Dabhade Madhuri, Jadhav Vrushali, Sayyad Farhin "A Survey Paper On Twitter Data Analysis And Visualization Using The R Language With Hadoop" Vol 2-Issue 3 (395-400) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P43
44
Approximate Bone Analysis
Author(s): Bindushree S, Chaithra R, Shreelakshmi S J, G Narayanaswamy
Page(s): 401-405
Abstract

The paper presents that the results of approximate bone analysis. Here by using a software called COMSOL Multiphysis, we created a appropriate bone model in the geometry plane of the software used. Then by fixing the bottom of bone model we apply different pressure on the top and by observing the plots Von-mises stress and displacement we can analyze the bone.

Keyword: COMSOL MULTIPHYSICS, Approximate bone, Calcareus fractures, Displacement.

×
IJSRED

Bindushree S, Chaithra R, Shreelakshmi S J, G Narayanaswamy "Approximate Bone Analysis" Vol 2-Issue 3 (401-405) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P44
45
Kinetic Study of Banana Stalk Ash Assisted Bioremediation of Crude-oil Contaminated Soil Based on Biomass Growth
Author(s): Osoka,E.C, Kefas,H.M, Igboko,N, Anyikwa,S.O.
Page(s): 406-412
Abstract

This work studies the kinetics of bioremediation of Crude Oil contaminated soil using banana stalk ash as a bio-stimulant, by studying the kinetics of biomass growth and nature of yield. Twelve samples of soil contaminated with 20g to 60g of Crude oil and with 0g to 60g of banana stalk ash added as bio-stimulant were studied based on the total petroleum hydrocarbon. The experimental data obtained were fit to four models based on biomass growth kinetics and yield using the Curve-fitting toolbox of MATLAB software and compared based on their adjusted R-square. The analysis of the results reveal that the biomass growth follows the logistic growth model with varying yield for all twelve experiments, with or without addition of bio-stimulant, to an accuracy of more than 99% thus making it the model of choice for explaining banana talk ash assisted bioremediation..

Keyword: bioremediation, banana stalk ash, biomass growth, yield, kinetics, bio-stimulant.

×
IJSRED

Osoka,E.C, Kefas,H.M, Igboko,N, Anyikwa,S.O "Kinetic Study of Banana Stalk Ash Assisted Bioremediation of Crude-oil Contaminated Soil Based on Biomass Growth " Vol 2-Issue 3 (406-412) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P45
46
Static Flexural Analysis of Thick Beam Using Higher Order Shear Deformation Theory
Author(s): N.G.Patil, Dr.G.R.Gandhe, D.H.Tupe, D.B.Gaidhane
Page(s): 413-420
Abstract

In the present study, a higher order shear deformation theory is developed for static flexure analysis of thick isotropic beam. Cantilever beam is analyzed for the axial displacement, Transverse displacement, Axial bending stress and transverse shear stress. The governing differential equation and boundary conditions of the theory are obtained by the principle of virtual work. The numerical results have been computed for various length to thickness ratios of the beams and the results obtained are compared with those of Elementary, Timoshenko, trigonometric and other hyperbolic shear deformation theories and with the available solution in the literature.

Keyword: bioremediation, banana stalk ash, biomass growth, yield, kinetics, bio-stimulant.

×
IJSRED

N.G.Patil, Dr.G.R.Gandhe, D.H.Tupe, D.B.Gaidhane "Kinetic Study of Banana Stalk Ash Assisted Bioremediation of Crude-oil Contaminated Soil Based on Biomass Growth " Vol 2-Issue 3 (413-420) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P46
47
“Nirbhaya” with U- A Women’s Safety Device
Author(s): DK.Shende, Ganesh Kalyankar
Page(s): 421-427
Abstract

In the present study, a higher order shear deformation theory is developed for static flexure analysis of thick isotropic beam. Cantilever beam is analyzed for the axial displacement, Transverse displacement, Axial bending stress and transverse shear stress. The governing differential equation and boundary conditions of the theory are obtained by the principle of virtual work. The numerical results have been computed for various length to thickness ratios of the beams and the results obtained are compared with those of Elementary, Timoshenko, trigonometric and other hyperbolic shear deformation theories and with the available solution in the literature.

Keyword: bioremediation, banana stalk ash, biomass growth, yield, kinetics, bio-stimulant.

×
IJSRED

DK.Shende, Ganesh Kalyankar “Nirbhaya” with U- A Women’s Safety Device Vol 2-Issue 3 (421-427) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P47
48
Effective Adsorption of Eriochrome Black T From aqueous Solution using γ -Fe2O3 nanopowder
Author(s): Mohan.S, Manjunath.R, B.M.Nagabhushana, Chikkahanumantharayappa, C. Shivakumara
Page(s): 428-437
Abstract

In this study, nano sized γ-Fe2O3 powder was prepared by low temperature combustion method and used as an effective adsorbent for the removal of toxic azo dye, Eriochrome Black T from aqueous solution. The powder was characterized by powder X-ray diffraction (PXRD), Scanning electron microscopy (SEM), Fourier transform infrared spectra (FTIR). The XRD results reveals the formation of well crystalline Fe2O3 in hexagonal phase along with small Fe3O4 impurity peaks. The adsorption studies were carried on 10 ppm dye solution at different parameters like Initial dye concentration, adsorbent dosage and contact time. The experimental result shows that, the maximum percentage adsorption (70%) is observed at 40 mg of γ -Fe2O3 nano powder, at contact time of 8 min.

Keyword: solution combustion, PXRD, FTIR, SEM, Adsorption, waste water.

×
IJSRED

Mohan.S, Manjunath.R, B.M.Nagabhushana, Chikkahanumantharayappa, C. Shivakumara "Effective Adsorption of Eriochrome Black T From aqueous Solution using γ -Fe2O3 nanopowder" Vol 2-Issue 3 (428-437) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P48
49
Biosorption of Plumbum Ions by Immobilized Lengkeng(Euphorialogan lour) Shell
Author(s): Dicko Kharisma Putra, Bahrizal, Mawardi, Sri Benti Etika, Desy Kurniawati
Page(s): 438-442
Abstract

The plumbum ions biosorption was batch method by silica immobilized lengkeng shell has been conducted. The biosorbents obtained were characterized using FTIR. The spectrum shows the bonding of immobilized lengkeng shell, seen in wave number 3355.52 cm-1 is OH group, wave number 1637.09 cm-1 is group C=O and wave number 1063.91 cm-1 which is the Si-O-Si group. The uptake capacity on plumbum ions have been examined for influence of pH and concentration solutions. The proceedswas foundat pH 6, and concentration solutions 550 mg/L are the optimum adsorption of plumbum ionswith maximum uptake capacity was 29.67 mg/g.

Keyword: Biosorption, plumbum, immobilization, lengkeng shell, batch method.

×
IJSRED

Dicko Kharisma Putra, Bahrizal, Mawardi, Sri Benti Etika, Desy Kurniawati "Biosorption of Plumbum Ions by Immobilized Lengkeng(Euphorialogan lour) Shell" Vol 2-Issue 3 (438-442) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P49
50
Automation in Measurement of RLC
Author(s): Shubham Avhad,Tanmay Gore, Vikrant Chincholkar, Vedant Satpute
Page(s): 443-446
Abstract

Measurement of electrical parameter such as Inductance (L), Capacitance(C), and Resistance(R) plays an integral role in the real world implementation of the circuits. This paper is focused on automatically detection of elements such as resistor, inductor, capacitor and measurement of parameters related to it.This simple techniques leads a low cost device at the beginner level. The device uses ArduinoNano for detection of elements with auto scaling and auto ranging functions. The reason behind the implementation of this device is that traditional method uses manual work of knob selection which is time consuming. By understanding the physical characteristics of these devices we can detect and measure them through automation.

Keyword: - - -.

×
IJSRED

Shubham Avhad, Tanmay Gore, Vikrant Chincholkar, Vedant Satpute "Automation in Measurement of RLC" Vol 2-Issue 3 (443-446) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P50
51
Performance Enhancement For Smart Antenna Using Arls Technique
Author(s): Rohit Bansal, Vishal Garg, Manpreet Kaur
Page(s): 447-451
Abstract

Measurement of electrical parameter such as Inductance (L), Capacitance(C), and Resistance(R) plays an integral role in the real world implementation of the circuits. This paper is focused on automatically detection of elements such as resistor, inductor, capacitor and measurement of parameters related to it.This simple techniques leads a low cost device at the beginner level. The device uses ArduinoNano for detection of elements with auto scaling and auto ranging functions. The reason behind the implementation of this device is that traditional method uses manual work of knob selection which is time consuming. By understanding the physical characteristics of these devices we can detect and measure them through automation.

Keyword: - - -.

×
IJSRED

Rohit Bansal, Vishal Garg, Manpreet Kaur "Performance Enhancement For Smart Antenna Using Arls Technique" Vol 2-Issue 3 (447-451) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P51
52
A Survey on Secure Data Accessing and Sharing Using Cryptographic Algorithms in Cloud Computing Environment
Author(s): J.Mala, Dr.A.N.Jayanthi, S.Rajesh
Page(s): 452-455
Abstract

Data sharing in the cloud is a method that allows users to conveniently access data over the cloud. The data owner outsources their data in the cloud due to cost reduction and the great accessibilities provided by cloud services. Data owner is not able to control over their data, because cloud service provider is a third party user. The major problem with data sharing and accessing in the cloud is the privacy and security issues. Various Cryptographic techniques are available to maintain user privacy and secure data sharing. This paper is mainly focus on several encryption methods to deal with secure data sharing and accessing in the cloud computing environment.

Keyword: Cloud, data sharing, access control, security, privacy, encryption.

×
IJSRED

J.Mala, Dr.A.N.Jayanthi, S.Rajesh "A Survey on Secure Data Accessing and Sharing Using Cryptographic Algorithms in Cloud Computing Environment" Vol 2-Issue 3 (452-455) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P52
53
An Efficient Analysis On Geo-Social Media To Compose Real-Time Decisions in Big-Data
Author(s): K N Sai Sanjana, Dr. Thippeswamy G R, Nikitha M, Pavitra L, Rachana K R
Page(s): 456-461
Abstract

Data sharing in the cloud is a method that allows users to conveniently access data over the cloud. The data owner outsources their data in the cloud due to cost reduction and the great accessibilities provided by cloud services. Data owner is not able to control over their data, because cloud service provider is a third party user. The major problem with data sharing and accessing in the cloud is the privacy and security issues. Various Cryptographic techniques are available to maintain user privacy and secure data sharing. This paper is mainly focus on several encryption methods to deal with secure data sharing and accessing in the cloud computing environment.

Keyword: Cloud, data sharing, access control, security, privacy, encryption.

×
IJSRED

K N Sai Sanjana, Dr. Thippeswamy G R, Nikitha M, Pavitra L, Rachana K R "An Efficient Analysis On Geo-Social Media To Compose Real-Time Decisions in Big-Data" Vol 2-Issue 3 (456-461) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P53
54
Grey Relational Analysis on CO2 Laser Cutting Quality of Nano Clay Composites Polymers
Author(s): A.M. Abdel Maboud, I.S.mohammed, Ahmed Saleh, Shokria abbas
Page(s): 462-476
Abstract

Laser beam cutting of polymers seems to be a superior tool to any cutting methods duehigh material utilization and production flexibility, precise cuts with narrow kerf width, faster cutting process, better accuracy and high cut edge quality .Moreover, no tool wear or tool change.
This paper presents a brief review of work done by some researchers based on laser cutting process for parametric optimization using different techniques. Sixteen Experimental tests are arranged according to Taguchi method. The influence of laser cutting parameters on the cut quality is studied for two types of nanoclay composites polymers (HDPE and PP). Moreover, a comparison between PP and HDPE nanoclay composites polymers has been done based on grey relational analysis for laser cut quality .The results are analyzed to assess the optimum cutting conditions for each polymer.

Keyword: HDPE, PP, Nanoclay composites, Greyrelational analysis, ANOVA, Laser cut ,MRR, KW, HAZ , Dross.

×
IJSRED

A.M. Abdel Maboud, I.S.mohammed, Ahmed Saleh, Shokria abbas "Grey Relational Analysis on CO2 Laser Cutting Quality of Nano Clay Composites Polymers" Vol 2-Issue 3 (462-476) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P54
55
Design Of System for Pest Indetification in Leaf and Stem
Author(s): Hayath TM, Pallavi B, Farzana S, Supriya P, Tanushree C
Page(s): 477-482
Abstract

There are countless number of plant species available across the global which might be useful plants or might be weeds. When farmers encounter a plant in their field, it is necessary for them to know the type of plant growing in their field so that they can evaluate the useful and harmful qualities of the plant, if the field is infected with a pest, then farmer might be interested in knowing type of pest and also their control measures.Hence, in this paper we are proposing a system which detetcts pest in leaf and stem and also lists control measure fro the same.

Keyword: Pest,Leaf,Image Processing.

×
IJSRED

Hayath TM, Pallavi B, Farzana S, Supriya P, Tanushree C "Design Of System for Pest Indetification in Leaf and Stem" Vol 2-Issue 3 (477-482) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P55
56
Survey on Patient Waiting Time in Hospital Queuing System in a Big Data
Author(s): Mr. Prashant Patil , Dr.Sanjay Thakur
Page(s): 483-486
Abstract

Due to the huge increase in population hospitals are overcrowded because of this it becomes difficult for a hospital management system to control or to minimize patient waiting time while getting treatment in hospital. While taking treatment doctors mentioned several different tests to diagnose the disease to give proper treatment. Thus while evaluating this entire test we have to wait in a queue. A patient has to wait until the entire patient before him or she gets treated. Unnecessary waiting time not only waste patient time but also give frustration during waiting in the queue. It would be more convenient if a patient could get the predicted waiting time and treatment plan on an application that shows the treatment plan and predicted waiting time in real time. Therefore to increase the efficiency and to meet the patent requirement we come up with a new technique called PTTP with HQR i.e. Hospital Queuing-Recommendation System is developed. In this method, the PTTP algorithm predicts the treatment time based on hospital data. Based on this waiting time HQR recommend the treatment plan for the patient. As the patient data is off in a huge amount we have use Apache Hadoop to achieve the goal.

Keyword: Big data, Pig, Data Mining Technique, Hospital Historical dataset, PTTP algorithm, Random forest.

×
IJSRED

Mr. Prashant Patil , Dr.Sanjay Thakur "Survey on Patient Waiting Time in Hospital Queuing System in a Big Data" Vol 2-Issue 3 (483-486) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P56
57
Aggregate Secured Key Cryptosystem on cloud with Dynamic Data Sharing
Author(s): Yateesh Kumar D G, Dr. Thippeswamy G R, Prajwal R, Prashanth C K, Subramaniyam R
Page(s): 487-493
Abstract

Due to the huge increase in population hospitals are overcrowded because of this it becomes difficult for a hospital management system to control or to minimize patient waiting time while getting treatment in hospital. While taking treatment doctors mentioned several different tests to diagnose the disease to give proper treatment. Thus while evaluating this entire test we have to wait in a queue. A patient has to wait until the entire patient before him or she gets treated. Unnecessary waiting time not only waste patient time but also give frustration during waiting in the queue. It would be more convenient if a patient could get the predicted waiting time and treatment plan on an application that shows the treatment plan and predicted waiting time in real time. Therefore to increase the efficiency and to meet the patent requirement we come up with a new technique called PTTP with HQR i.e. Hospital Queuing-Recommendation System is developed. In this method, the PTTP algorithm predicts the treatment time based on hospital data. Based on this waiting time HQR recommend the treatment plan for the patient. As the patient data is off in a huge amount we have use Apache Hadoop to achieve the goal.

Keyword: Big data, Pig, Data Mining Technique, Hospital Historical dataset, PTTP algorithm, Random forest.

×
IJSRED

Yateesh Kumar D G, Dr. Thippeswamy G R, Prajwal R, Prashanth C K, Subramaniyam R "Aggregate Secured Key Cryptosystem on cloud with Dynamic Data Sharing" Vol 2-Issue 3 (487-493) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P57
58
IoT Based Solution for Grape Disease Prediction Using Convolutional Neural Networkand Farm Monitoring
Author(s): R.Chavan, A.Deoghare, R.Dugar, P.Karad
Page(s): 494-500
Abstract

Diseases in fruit cause devastating problem in economic losses and production in agricultural industry worldwide.Subsequently, reduction in plant diseases by early diagnosis results in substantial improvement in quality of the product.A solution for predicting the grapes disease is provided, and also detection of the grape disease will be done using CNN approach and real time collected data of environmental parameters are used for predicting the disease probability. The CNN approach is applied on the image of the leaf. Different layers of CNN approach are applied on the image. Training data and testing data are resized into a specific resolution and then provided to the layers of CNN. On the other hand, the values received from humidity, temperature and soil moisture sensor respectively are transmitted to the Microsoft’s Azure Cloud by Raspberry-Pi. Then the sensor values are used in a trained Linear Regression model to forecast the percentage of disease. Based on the outcomes of above detection and prediction phases, suggestions of appropriate fertilizers with their appropriate quantity will be provided to avoid excess use of fertilizers and reduce their cost.

Keyword: IoT, CNN, PDI.

×
IJSRED

R.Chavan, A.Deoghare, R.Dugar, P.Karad "IoT Based Solution for Grape Disease Prediction Using Convolutional Neural Networkand Farm Monitoring" Vol 2-Issue 3 (494-500) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P58
59
A Survey: Issues And Challenges Of VOIP traffic Over WiMAX
Author(s): Anurag Saini, Avnish Kansal, Jasmeet Singh
Page(s): 501-505
Abstract

With the introduction of different wireless communication technologies, the demand of users for real time services like voice along with data called VoIP is increasing tremendously. In order to provide high quality services, the new technologies like WiMAX has to consider all the quality parameters attached with a service. The paper thus discusses the WiMAX support to such services along with all the possible features of VoIP, its quality parameters like delay, jitter, throughput, etc. and emphasis on what work has been done in this perspective so as to improve the quality of the VoIP traffic by highlighting the various aspects, methodology and limitations of previous work in this field. It has been shown that, there still remain some issues and considerations, which could be taken into account so as to have high quality VoIP traffics.

Keyword: Quality of Service; VoIP issues; WiMAX.

×
IJSRED

Anurag Saini, Avnish Kansal, Jasmeet Singh "A Survey: Issues And Challenges Of VOIP traffic Over WiMAX " Vol 2-Issue 3 (501-505) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P59
60
The Effects of Heavy Metals on the Fish Biodiversity in West Bengal
Author(s): Koustav Sen, Rimpa Mandal
Page(s): 505-520
Abstract

Heavy metals are naturally exist in very little amount in aquatic system. But now a days this amount are higher than previous time due to many activities. The main cause of the heavy metals amount increase is industrial waste product mixed with water system. Fish and others aquatic organisms absorb the pollutants directly from water and indirectly from food chains. This heavy metal can effect on geological, hydrological and also it effects fish population and growth. Secondarily it effects human through fish. Heavy metals are entered into fish bodies by gills, body surface and digestive track. The present study assessed heavy metals effect on fish biodiversity in west Bengal,India. This study also highlight actual level of heavy metals in industrial and non-industrial area in west Bengal.

Keyword: Heavy Metals, Contamination, Disease, Source.

×
IJSRED

Koustav Sen, Rimpa Mandal "The Effects of Heavy Metals on the Fish Biodiversity in West Bengal" Vol 2-Issue 3 (505-520) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P60
61
Determination Of Heat Transfer Coefficients and Friction Factors For Turbulent Flow Through Rectangular Ducts With Triangular Ribs
Author(s): Abhishek Kumar, Mayank Kumar Dwivedi
Page(s): 521-525
Abstract

Sundarban is the largest delta on the planet.it covers about one million hector. Sundarban situated in the delta of the river Ganga, Brahmaputra and Meghna and it is famous for his marine and estuarine fish resources. Sundarban shared two country borders- one is India and other is Bangladesh.in sundarban around 440 species of fishes, 20species of prawn and 44 species of crabs are present. But now a days sundarbans faces lots of difficult problems which have an impact on the biodiversity, sustainability and live hood of fish resources and also natural climate changes such as cyclonic storms, low pressure in bay of Bengal, shrinking tiger pawn population, fish seed collection etc. the present study highlight the present status of fish biodiversity in sundarban and their actual threats.

Keyword: Fish Biodiversity, IUCN Status, Threats, Sundarbans, Physicochemical parameter.

×
IJSRED

Abhishek Kumar, Mayank Kumar Dwivedi "Determination Of Heat Transfer Coefficients and Friction Factors For Turbulent Flow Through Rectangular Ducts With Triangular Ribs" Vol 2-Issue 3 (505-520) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P61
62
Trichodermaviride: Isolation, Characterization, Cultivation and Its Application as Effective Biocontrol Agent
Author(s): Ashish S.Ramteke
Page(s): 526-530
Abstract

The genusTrichoderma consists of anamorphic fungi isolated primarily from soil and decomposing organic matter, with teleomorphs, belonging to the ascomycete genus Hypocrea. They can work against fungal phytopathogens through mechanism such as mycoparasitism, competing for nutrients and space, modifying environmental conditions and antibiosis and plant defensive mechanisms. Trichodermaviride have also been reported to produce a plethora of secondary metabolites showing antimicrobial activity. Trichodermaviride have been widely used in agriculture as biocontrol agents and inoculants to provide plant growth promotion. The molecular mechanism supporting this highly desirable beneficial effect of plant growth promotion are not fully clarified and include improvement of nutrient availability and uptake for the plant. Many Trichoderma strains colonize plant roots of dicots and monocots.

Keyword: Trichodermaviride, Biocontrol, Antagonist, Ecosystem, Growth Promotor.

×
IJSRED

Ashish S.Ramteke "Trichodermaviride: Isolation, Characterization, Cultivation and Its Application as Effective Biocontrol Agent" Vol 2-Issue 3 (526-530) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P62
63
Magnetic, Mossbauer and Micro-Analytical Findings of Archaeological Pottery Sample of Manaveli, India
Author(s): G.Raja Annamalaia, R.Ravisankar, A.Chandrasekaran
Page(s): 531-537
Abstract

The magnetic properties of archaeological pottery specimen combined with Mössbauer study can provide useful results for their characterization. The main objectives of the present investigation are to determine the technological factors applied for the pottery manufacturing (temperature, heating conditions, and duration of heating of the pottery). In order to do these findings, the pottery clay samples collected from the archaeological site Manaveli, Puducherry, India are analyzed. Different analytical methods such as Mössbauer, scanning electron microscopy coupled with energy dispersive spectrometer and vibrating sample magnetometer have been utilized to evaluate the firing temperature and firing conditions of the samples during their production.

Keyword: Archaeological pottery sample, Mössbauer study, Micro structural and chemical analysis, vibrating sample magnetometric study.

×
IJSRED

G.Raja Annamalaia, R.Ravisankar, A.Chandrasekaran "Magnetic, Mossbauer and Micro-Analytical Findings of Archaeological Pottery Sample of Manaveli, India" Vol 2-Issue 3 (531-537) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P63
64
Study of Contact Time on Effectiveness of Natural Adsorbents to Adsorb Crystal Violet DYE
Author(s): Sudevi Basu, Tanushree Deb, Vanitha Nagliekar
Page(s): 538-542
Abstract

Synthetic dyes are used for colouring in textile, leather and manufacturing industries and these are water soluble and produce very bright colours in water. When it is discharged without treatment, it leads to pollution. This research gives an insight into the adsorption studies with a focus on time of contact on the efficiency of decolourizing Crystal Violet dye with natural adsorbents (Citrullus lanatus Peel, Citrullus lanatus Rind and Citrus limetta Peel). This study reveals that Citrullus lanatus Rind can effectively decolourize 52.2% Crystal Violet dye at concentration of 50 mg/L with lower contact time of 60 min and at 120 min, 67.7% dye removal is achieved. At increased initial dye concentration of 75 mg/L and 100 mg/L, Citrullus lanatus Peel is effective in decolourizing Crystal Violet dye at lower contact time of 60 min and percentage dye removal is 67.4% and 65% respectively. At high initial dye concentration of 125 mg/L, high contact time of 120 min with Citrullus lanatus Peel is required to remove 58.8% Crystal Violet Dye. As compared with these two adsorbents, Citrus limetta Peel is not very effective in adsorbing Crystal Violet Dye. .

Keyword: Citrullus lanatus Peel, Citrullus lanatus Rind and Citrus limetta Peel, Adsorbents.

×
IJSRED

Sudevi Basu, Tanushree Deb, Vanitha Nagliekar "Study of Contact Time on Effectiveness of Natural Adsorbents to Adsorb Crystal Violet DYE" Vol 2-Issue 3 (538-542) May - June 2019, International Journal of Scientific Research and Engineering Development (IJSRED) :ISSN:2581-7175, www.ijsred.com.

×
IJSRED-V2I3P64
Under in review process, article will publish soon...